PHOENIX
PHOENIX
PHOENIX
PHOENIX
PHOENIX
Preview: PHOENIX
Preview: PHOENIX
Preview: PHOENIX
Preview: PHOENIX
Preview: PHOENIX
PHOENIX
PHOENIX
PHOENIX
PHOENIX
PHOENIX
PHOENIX
Mobile Preview: PHOENIX
Mobile Preview: PHOENIX
Mobile Preview: PHOENIX
Mobile Preview: PHOENIX
Mobile Preview: PHOENIX

PHOENIX

Product No.:
Phoenix
Price on request

Add to wish list
Ask about product
DESCRIPTION

The PHOENIX is the new non-contact RADAR area/velocity flowmeter specially designed for rivers or large irrigation channels. Elaborated opening angle of 32° allows the radar to see a full spectrum of velocities over the river or channel width.

The PHOENIX provides highly accurate flow measurements under a wide range of flow and site conditions.

The PHOENIX is featured with the well-known auto-diagnostic system introduced by Flow-Tronic on the RAVEN-EYE®. Internal sensors monitor and report the condition or “health” of the measuring system.

Flow Measurement Method:

  • Conversion from surface velocity measurement to average velocity based on profiler measurement (For rivers: ADCP or current meter).
  • Possibility to base conversion on models.
  • Conversion of water level and profile size to fluid area.
  • Multiplication of fluid area by average velocity to obtain the flow rate.

The PHOENIX is a universal non-contact level/velocity flow sensor that can be connected to the RTQ flow logger series or the IFQ MONITOR. Optionally it can also be connected to any device using the Modbus ASCII communication protocol.

TECHNICAL SPECIFICATIONS
Velocity Measurement
Method Radar
Type Continuous Wave Doppler
Range ±0,10 to ±15 m/s (depending on flow conditions*) (bi-directional / flow direction detection)
Frequenzy 24,125 GHz (K-Band)
Accuracy ±1%
Resolution 1 mm
Distance to water 0,50 ... 35 m
Radar Opening Angle
Opening angle 32°
Installation angle 60°
Power
Supply 4 to 26 VDC
Consumption 1,38 W (during active measurement)
Level Measurement (Radar)
Method Radar
Range 0,01 to 15 m (standard range)
0,01 to 35 m (extended range)
Accuracy ±2 mm of reading
Resolution 1 mm
Operation temp. -40 ... +70°C
Frequency 26 GHz (K-Band)
Optional Separate Level Measurement Any 4-20 mA loop powered sensor
Communication RS-485 communications port with Modbus ASCII slave communication protocol
Outputs (optional) 4-20mA 1 for validated surface velocity (vQP) or validated surface velocity including median filter (vQPMF)
Material & Dimensions
Dimensions  166 mm H x 157 mm W x 178 mm L
Weight  2,60 kg
Material Robust PU
Protection IP68
Color Grey
Environmental Conditions
Operating temperature range -30°C to 70°C
Storage temperature range -40°C to 80°C
Certifications CE
KUNDENNUTZEN
Applications
  •     Monitoring of rivers, canals and streams
  •     Water management
  •     Flood control
  •     Monitoring the flow of irrigation canals
  •     Hydroelectric power plants
  •     Modeling of stormwater basins
  •     Large sewers
  •     Discharges
DOCUMENTS
Technical Specifications Phoenix  (545.3 KB)
Brochure Phoenix  (2.36 MB)

Customer reviews

Unfortunately there are no review yet. Be the first who rate this product.

Your opinion

This product is compatible with (for example):

Raven Eye 2
TOP
Raven Eye 2
  • Accurate flow measurement
  • Cost-effective
  • Portable or stationary version available
  • Easy installation
  • Totally sealed sensor
  • Developed for field applications
  • Direct RS485 interface available
  • Perfect solution for difficult flow conditions
  • stream
Price on request
Raven Eye Atex
TOP
Raven Eye Atex
  • ATEX certificate: Ex II 2 G Ex ib IIB T4 Gb
  • Accurate flow measurement
  • Cost-effective
  • Portable or stationary version available
  • Easy installation
  • Totally sealed sensor
  • Developed for field applications
  • Direct RS485 interface available
  • Perfect solution for difficult flow condition
  • stream
Price on request
BELUGA
BELUGA
  • Improved accuracy due to digital spectral analysis of the velocity distribution
  • Easy integration with existing SCADA or telemetry systems
  • Embedded RS485 communication port with Modbus ASCII protocol
  • Straight 4-20 mA output for velocity
  • ERTACETAL outer shell with epoxy potting within
  • IP68 enclosure
  • Available in 2 versions: 20° and 45°
  • Bidirectional measurement
Price on request
EMV 500
EMV 500
  • Accurate flow measurements
  • grease tolerant due to debilitating electrodes
  • Field replaceable/interchangeable
  • open sewer systems
  • Optional : ATEX version

 

Price on request
TORPEE MAG
TORPEE MAG
  • Multi-electrode sensor delivering accurate total flow profile rivaling the performance of a full-bore meter (0,5% accuracy)
  • Bidirectional measurement (optional)
  • Ease of hot tap installation without interrupting service
  • Economical solution for medium & large line sizes reducing drastically installation costs (sizes from DN 100 to DN2500)
  • Removable in pipes under pressure for inspection, cleaning, calibration or verification
  • Sensor coated with food & beverage certified epoxy coating
  • Robust construction for operational longevity with rugged 316 stainless steel/aluminium sensor body
  • Comes pre-calibrated from the Calibration Lab. with no moving parts, the sensor contains nothing to wear or break
  • Made in Belgium
Price on request

This product is similar to:

Raven Eye Atex
TOP
Raven Eye Atex
  • ATEX certificate: Ex II 2 G Ex ib IIB T4 Gb
  • Accurate flow measurement
  • Cost-effective
  • Portable or stationary version available
  • Easy installation
  • Totally sealed sensor
  • Developed for field applications
  • Direct RS485 interface available
  • Perfect solution for difficult flow condition
  • stream
Price on request
TORPEE MAG
TORPEE MAG
  • Multi-electrode sensor delivering accurate total flow profile rivaling the performance of a full-bore meter (0,5% accuracy)
  • Bidirectional measurement (optional)
  • Ease of hot tap installation without interrupting service
  • Economical solution for medium & large line sizes reducing drastically installation costs (sizes from DN 100 to DN2500)
  • Removable in pipes under pressure for inspection, cleaning, calibration or verification
  • Sensor coated with food & beverage certified epoxy coating
  • Robust construction for operational longevity with rugged 316 stainless steel/aluminium sensor body
  • Comes pre-calibrated from the Calibration Lab. with no moving parts, the sensor contains nothing to wear or break
  • Made in Belgium
Price on request
BELUGA
BELUGA
  • Improved accuracy due to digital spectral analysis of the velocity distribution
  • Easy integration with existing SCADA or telemetry systems
  • Embedded RS485 communication port with Modbus ASCII protocol
  • Straight 4-20 mA output for velocity
  • ERTACETAL outer shell with epoxy potting within
  • IP68 enclosure
  • Available in 2 versions: 20° and 45°
  • Bidirectional measurement
Price on request
Raven Eye 2
TOP
Raven Eye 2
  • Accurate flow measurement
  • Cost-effective
  • Portable or stationary version available
  • Easy installation
  • Totally sealed sensor
  • Developed for field applications
  • Direct RS485 interface available
  • Perfect solution for difficult flow conditions
  • stream
Price on request
EMV 500
EMV 500
  • Accurate flow measurements
  • grease tolerant due to debilitating electrodes
  • Field replaceable/interchangeable
  • open sewer systems
  • Optional : ATEX version

 

Price on request
For more information, please visit the home page for this product.