The IFQ MONITOR is a user-friendly monitor and converter for RAVEN-EYE, PHOENIX, BELUGA and EMC flow sensors. It is an easy-to-use and configure monitor and converter for Flow-Tronic flow sensors. It has a digital serial RS485 communication port with specific protocols for RAVEN-EYE or BELUGA flow sensors and a 4 ... 20 mA input for external levels. The IFQ MONITOR is the easiest way to integrate an open channel flow sensor into a local station.
1x RS485 digital sensor interface for speed sensor1x 4-20 mA analog input for level sensor
Setup and operation
7-fold sealed membrane keyboard. Configuration of level offset, units, output ranges and language via the keyboard.
Available units
Flow: l/s, m³/h, m³/s, gpd, gpm, cfmSpeed: cm/s, m/s, fpsLevel: mm, cm, m, inch, feetTotal flow: l, m³, g, cf
Available languages
EN, DE, FR, SP, etc. RTQ log software via direct USB communication (optional)
Display & LED
- Graphical display in white on blue with 144 x 32 pixels - Two lines of text display with scrolling between: FLOW, VELOCITY, STAGE and TOTAL FLOW Internal battery status indicator, GSM network status indicator and 6 status LEDs.
Status display of the GSM network
6 status indicator LEDs.
Exits
Three 4-20 mA outputs, max. Charge 250 Ω.The outputs are FLOW, LEVEL and VELOCITY.
Storage Type
Flash memory (SD card)
Data log channels
18
Accuracy
<1s/day
Contact Closure
1x relay / SPST-NO output for TOTAL FLOW.1x relay / SPST-NC output for FAULTY alarm based on RAVEN-EYE's® car diagnostic system.
Rated current
6 A at 30 VDC / 6 A at 250 VAC
Transfer
Worldwide penta-band UMTS/HSPA engine (GPRS or 3G)GSM: 850/900/1800/1900 MHzUMTS: 800/850/900/1900/2100 MHzCSD with up to 14.4 Kbit/sData files can be sent directly to an FTP server