MP1 Grundfos Submersible pump

Product No.:: MP1G-122743

KABEL:

2.331,00 EUR

incl. 20% tax

Add to wish list

Ask about product

DESCRIPTION

The Grundfos MP 1 is a 2” environmental pump used for water monitoring. You can collect groundwater samples for analysis from depths down to 90 m to establish the precise type and degree of contamination.

The Grundfos MP 1 submersible pump is specially designed for purging and sampling of monitoring wells with a diameter of at least 50 mm or bigger. The pump motor is controlled by an adjustable frequency converter. Due to the variable setting of the frequency, the capacity of the pump can be adjusted from 0 to 2 ^m³^/hour. This results in a steady flow of anaerobe water. The high capacity of this pump allows for quick purging of the measuring point. By setting a low pumping capacity the same pump can be used for sampling. Built- in safeguards protect the Grundfos MP 1 and the convertor against overload. The actual frequency can be read from a display.

Please check the fluid in the engine before each installation and storage!

Centrifugal pump
Clear pumping and sampling of wells
Stainless steel 316
delivery head max. 86 m
adjustable capacity up to max. 1,8 m3/h, 220 V 1,1 kW
frequency converter required
pump DM 45 mm
length 287 mm

MODEL VARIANTS

Without power cable
PTFE power cable - 30 m
PTFE power cable - 60 m
PTFE power cable - 90 m

Manufacturer: Eijkelkamp Soil & Water B.V.

TECHNICAL SPECIFICATIONS

Full load capacity	0.5 HP/220V/ PH/400 Hz/5.5A
Maximum current (SFA)	5.5 Amps
Motor protection	Thermal overload
Current overload	Built-in MP 1 frequency converter
Minimum ambient fluid temperature	0°C
Maximum ambient fluid temperature	35°C
Motor lubrication	fluid Deionized water (DI)
Dimensions (pump and motor)	28.7 cm 4.6 cm
Net weight (pump and motor)	2.5 kg, without motor cable

CUSTOMER BENEFITS

full stainless steel/PTFE pump for both purging and sampling of all parameters
maximum lift 90 m of water
supplied with different lengths of PTFE cable, suspension cable and tubing
speed (flow) regulated
various warnings guard pump safety
converter to convert 110 or 240 Volts single phase to three phase 400 Volt 0-400Hz
can be fitted with PTFE or PE tubing (various sizes)
operated from mains or electronically regulated 110 or 240 Volt power generator
field replaceable impellers
high top capacity for purging, smooth flow for sampling
compact and easy to install; mobile
resistant against corrosive fluids
pumped medium only in contact with stainless steel and PTFE
anaerobe sampling
simple cleaning procedures

REPAIR AND SERVICE

Grundfos MP1 Repair & Service

Is your Grundfos MP1 submersible pump no longer working properly or does it require maintenance? We offer repair and service for Grundfos MP1 pumps.

In case of wear or technical problems, we inspect your Grundfos MP1 and determine which repair is possible and appropriate.

Have your Grundfos MP1 repaired

Please contact us first and briefly describe the problem. We will discuss the next steps with you and whether the pump should be sent to us for inspection.

After inspecting the pump, we will inform you about the result and any spare parts that may be required.

Do you need a Grundfos MP1 repair or have questions about our service? Contact us – we will be happy to help.

DOCUMENTS