The EPT1000 pressure transmitter is especially suitable for use in the field of process technology and monitoring, hydraulics and building technology, level measurement as well as for test and research operations.
Thanks to the stainless steel housing and the stainless steel sensor, pressures in the range of 100 mbar to 100 bar can be measured. Due to the factory calibration and temperature compensation, the pressure transmitter always delivers precise measurement results.
| Measuring range |
100 mbar to 100 bar |
| Accuracy |
±0.25 % FS (typical) to ±0.50 % FS max. |
| Calibration |
Factory calibration and temperature compensation |
| Case |
Stainless steel |
| Sensor |
Stainless steel |
| Oil filling |
Silicone oil |
| Operating temperature |
-20°C to 85°C |
| Protection |
IP65 |
| Outputs Interfaces |
4 to 20 mA, 1 to 5 VDC, 0.5 to 4.5 VDC |
| Output signal and supply |
Connection |
Exit |
Supply |
| |
2-wire |
4 to 20 mA |
9 to 30 VDC |
| |
3-wire |
1 to 5 VDC |
9 to 30 VDC |
| |
3-wire |
0.5 to 4.5 VDC |
9 to 30 VDC |
| Insulation resistance |
100 MΩ at 100 VDC |
| EMC Test |
IEC61000-6-2/IEC61000-6-3 |
| Reverse polarity protection |
No damage - no function |
- Hydraulic and pneumatic
- Machine building
- Pumps
- IoT pressure measurement
- Pressure chip encapsulated in an oil-filled metal housing
- Measuring ranges from 100mbar to 100bar
- Gauge pressure, absolute pressure
- Accuracy: ±0.25%FSO(Typ.)
