The LT1080 pressure probe is a gauge pressure probe and is specially designed for use in the field of drinking water supply as well as for groundwater and surface water monitoring. Thanks to the
stainless steel probe housing and the high-quality workmanship of the probe, it can also be used under adverse operating conditions and up to a depth of up to 200 m. Due to the factory calibration and temperature compensation, the probe always delivers precise measurement results.
In addition to the classic transmission to an evaluation unit or a process control system, the measured values can also be read directly on the device thanks to the LCD screen.
Measuring range |
1 mWs to 200 mWs |
Accuracy |
±0,25 % FS (typical) to ±0,50 % FS |
Calibration |
Factory calibration and temperature compensation
|
Probe Housing |
Stainless steel |
Protection |
IP68 |
Measured value display |
LCD display |
Cable |
PUR, PE or P TFE |
Exits,
Interfaces |
4 to 20 mA, 1 to 5 VDC, 0.5 to 4.5 VDC & Modbus RTU |
-
Drinking water systems
-
Ground water monitoring
-
Domestic water tanks
- Rain spillway basin
- Measuring ranges from 1mWs to 200 mWs
- IP68, Submersible level measurement
- LCD display
- Accuracy: ±0.25%FSO(Typ.)
- Calibrated and temperature compensated
- Stainless steel pressure sensor
- Output 4...20mA, DC1...5V, DC 0.5...4.5V, MODBUS RTU